📸 How to Get The Shot

Capture Confidently and Discreetly with MRB Smart Glasses

☀️ No More Tricking the Glasses in Daylight

Good news! In broad daylight, using one decal, you do not need to trick the glasses. Stealth Stickers are made with a premium material that enhance that natural concealment so you can just press record and go. They work like a tint, so if there's enough light passing through the sticker into the sensor, they will work no tricks needed.

✅ Quick Step-by-Step on how to trick in low light:

The main objective is to balance the light sensors in both the camera and the LED. So they must be evenly dark, that is why you must completely obscure the camera when in indoors, because the LED is blacked out, and the camera is receiving light.

1. Cover the left camera briefly
My go-to method: I use the back of my left hand (since I’m right-handed). It’s quick, natural, and easy to repeat. Point is to completely cover the camera.

2. Press the capture button
Press and hold like normal for a video or picture

3. Uncover the camera after the chime
VIDEO: You'll see the recording light come on and hear a tone. Wait about 1 second before you uncover the camera. 

PICTURE: After you covered the camera and pressed the button for a picture listen for the "picture chime" and quickly remove your hand or finger from the camera. Pictures can be tricky at first but practice and it will become easy.

ℹ️ Important Tip

If you accidentally miss the timing, don’t wait around for it to reset or speak. Just try again immediately and you’ll be back on track.

🧠 Pro Tip: Practice Makes Perfect

You’ll start to recognize the shutter or start tone with ease. With just a little practice, the whole process becomes second nature. Smooth motion and good timing are the secret sauce.